Erstellt eine Bemaßung mit Höhenkoten.
SOFiCAD > Bemaßung
You can use the “Elevation command” to create a new elevation chain or use the “Select elevation” option to add additional elevations to an existing elevation chain.
Like the normal AutoCAD dimensioning, the elevation dimension is not linked to objects, but refers to definition points that belong to the elevation. When changing dimensioned objects, you must include the relevant definition points in the selection set so that the elevation is updated.
To z. For example, to move a dimensioned formwork edge, select the formwork edge and the definition points of the dimensioning using the Cross object selection method. There are also handles at the definition points. For this reason, processing with the help of handles is the easiest way to change height levels.
The representation of the elevation is determined by an AutoCAD dimensioning style. When you click on an elevation, the “Elevation” tab appears with commands for changing elevations.
In order to use your own, custom blocks as a height symbol, you have to consider a few points:
the block must be created on a 1: 1 scale
the insertion point of the symbol is 0.0.0
Hatch patterns cannot be used, only solids
SOFiCAD rectangle cannot be used as a symbol
the height of the symbol should be 1 unit
By default, texts (height information) are generated centered over the text block
if the text should have a different location, you have to define an attribute with the attribute description “SOF_LM_INSERT_POINT” when defining the symbol, the text alignment of the attribute must be “bottom left”, “bottom right” or “bottom middle”.
the custom block must be inserted in the drawing or in the template drawing used