PT Geometry | Straight

Create stretched tendon geometry by specifying horizontal and vertical offsets at specific stations. In addition, bending radii or block lengthes can be provided to further specify the resulting geometry.

The component features a context menu, accessible by right-clicking.

Input

Name	Type	Structure	Description
Axis	Axis Definition	List	Axis as basis for this tendon geometry
Duct ID	Integer	List	ID of the duct geometry
Station	Text	Tree	Station or placement name for tendon point
H Offset	Number	Tree	Horizontal offset at corresponding station
V Offset	Number	Tree	Vertical offset at corresponding station
Block L	Text	Tree	Length of the bend block at corresponding station. If provided radius will be calculated automatically.
Block R	Text	Tree	Radius of the bend at corresponding station. If provided block length will be calculated automatically.
Sec Point	Text	Tree	Optional reference to section point
InteAttr	InteAttr	Item	Interpolation attributes

Output

Name	Type	Structure	Description
PT Geometry	Tendon Geometry	List	Resulting duct geometry

Context menu

Name	Type	Description
Select param type	Curve station	Defines stations along the entire axis based on curve parameter
	Span station	Defines stations within the bridge spans as detected by “S” Placement Type. For example, the 1st span is reparameterized from 0 to 1, 2nd span from 1 to 2, and so on.