# Simple T-Beam Section#

A simple T-beam cross section without any inclination.

## Overview#

NAME |
SOFiSTiK_Profile_T-Beam.rfa |

TYPE |
Superstructure |

DESCRIPTION |
T-Beam |

PICTURE |

## List of Parameter#

PARAMETER |
DIMENSION |
DESCRIPTION |
---|---|---|

Width |
[Length] |
Overall width of the section |

Width_Beam_Bottom |
[Length] |
Overall width at the bottom surface of the web |

Width_Beam_Top |
[Length] |
Overall width at the top surface of the web |

Thickness_Deck_Side |
[Length] |
Outside flange thickness |

Thickness_Deck_Middle |
[Length] |
Inside flange thickness |

Height_Total |
[Length] |
Overall height of the cross section |

# Deck Line - single slope#

## Overview#

Deck line with single inclination for deck and cantilever

## List of Parameter#

PARAMETER |
DIMENSION |
DESCRIPTION |
---|---|---|

Thickness_Cover |
[Length] |
Distance from bridge deck to the axis |

Slope_Deck |
[Slope] |
Slope of the deck |

Slope_Cantilever |
[Slope] |
Slope of the cantilever on both sides |

Width_Deck_Right/Left |
[Length] |
Width of the deck on right/left side of the axis |

Width_Parapet_Right/Left |
[Length] |
Range of right/left parapet |

Thickness_Cantilever_Right/Left |
[Length] |
Thickness of right/left cantilever |

Thickness_Cantilever_Edge |
[Length] |
Thickness of cantilever on the deck’s edge |

Width_Cantilever_Right/Left |
[Length] |
Width of the right/left cantilever |

BR_R/L |
[Length] |
Construction point for right/left parapet |

Control_CL_Right/Left |
[yes/no] |
If activated, Width_Cantilever_Right/Left parameter is taken into account. Otherwise, Width_Cantilever_Right/Left parameter is neglected. Width of cantilever is calculated according to the overall bridge width and Width_Slab_Bottom (for Hollow Box) / Width_Beam (for T-Beam) / Width_Beam and Width_Beam_Axis_Right/Left (for Double T-Beam) parameter(s). Parameter is not available in Superstructure Dialog. Editable in Revit Family Editor. |

Offset_Axis_Horizontal/Vertical |
[Length] |
Additional horizontal/vertical offset to the axis. |

# Deck Line - double slope#

## Overview#

Deck line with double inclination for deck and cantilever.

## List of Parameter#

PARAMETER |
DIMENSION |
DESCRIPTION |
---|---|---|

Thickness_Cover |
[Length] |
Distance from bridge deck to the axis |

Slope_Deck_Right/Left |
[Slope] |
Slope of the right/left side of deck |

Slope_Cantilever_Right/Left |
[Slope] |
Slope on the cantilever on both sides |

Width_Deck_Right/Left |
[Length] |
Width of the deck on right/left side of the axis |

Width_Parapet_Right/Left |
[Length] |
Range of right/left parapet |

Thickness_Cantilever_Right/Left |
[Length] |
Thickness of right/left cantilever |

Thickness_Cantilever_Edge |
[Length] |
Thickness of cantilever on the deck’s edge |

Width_Cantilever_Right/Left |
[Length] |
Width of the right/left cantilever |

BR_R/L |
[Length] |
Construction point for right/left parapet |

Control_CL_Right/Left |
[yes/no] |
If activated, Width_Cantilever_Right/Left parameter is taken into account. Otherwise, Width_Cantilever_Right/Left parameter is neglected. Width of cantilever is calculated according to the overall bridge width and Width_Slab_Bottom (for Hollow Box) / Width_Beam (for T-Beam) / Width_Beam and Width_Beam_Axis_Right/Left (for Double T-Beam) parameter(s). Parameter is not available in Superstructure Dialog. Editable in Revit Family Editor. |

Offset_Axis_Horizontal/Vertical |
[Length] |
Additional horizontal/vertical offset to the axis. |

# T-Beam Section#

## Overview#

NAME |
SOFiSTiK_1_T-Beam_single_slope.rfa / SOFiSTiK_1_T-Beam_double_slope.rfa |

TYPE |
Superstructure |

DESCRIPTION |
T-Beam cross section with parameterized height and width. |

## List of Parameter#

PARAMETER |
DIMENSION |
DESCRIPTION |
---|---|---|

Height_Beam |
[Length] |
Height of a beam |

Width_Beam_Left/Right |
[Length] |
Width of a beam on right/left side of an axis |

Offset_Cantilever |
[Length] |
Distance between cantilever and beam’s edge |

# Double T-Beam Section#

## Overview#

NAME |
SOFiSTiK_2_T-Beam_single_slope.rfa / SOFiSTiK_2_T-Beam_double_slope.rfa |

TYPE |
Superstructure |

DESCRIPTION |
Double T-Beam cross section with parameterized width and height of beams and position of beams’ axis. |

## List of Parameter#

PARAMETER |
DIMENSION |
DESCRIPTION |
---|---|---|

Width_Beam |
[Length] |
Width of each beam |

Height_Beam |
[Length] |
Height of a beam |

Width_Beam_Axis_Right/Left |
[Length] |
Distance between bridge axis and right/left beam axis |

Offset_Beam_Cantilever |
[Length] |
Distance between cantilever and beam’s edge |

Offset_Beam_Slab |
[Length] |
Distance between slab and beam’s edge |

Thickness_Slab_Edge_Beam_Right/Left |
[Length] |
Thickness of slab at the edge of the right/left beam |

Width_Slab_Transition_Right/Left |
[Length] |
Distance of variable thickness between beam’s edge and middle slab on right/left side |

# Hollow Box Section#

## Overview#

NAME |
SOFiSTiK_Hollow_single_slope.rfa / SOFiSTiK_Hollow_double_slope.rfa |

TYPE |
Superstructure |

DESCRIPTION |
Hollow Box cross section with parameterized height, slabs (top and bottom), haunches (top and bottom) and webs. |

## List of Parameter#

PARAMETER |
DIMENSION |
DESCRIPTION |
---|---|---|

Height |
[Length] |
Overall height of the section |

Thickness_Slab_Top |
[Length] |
Thickness of middle slab |

Thickness_Haunch_Top |
[Length] |
Thickness of top haunch |

Width_Haunch_Top |
[Length] |
Width of top haunch |

Width_Haunch_Transition_Top |
[Length] |
Distance of variable thickness of top haunch |

Angle_Web |
[Angle] |
Angle of the web |

Thickness_Web |
[Length] |
Thickness of the web |

Thickness_Slab_Bottom |
[Length] |
Thickness of bottom slab |

Width_Slab_Bottom |
[Length] |
Width of bottom slab |

Thickness_Haunch_Bottom |
[Length] |
Thickness of bottom haunch |

Width_Haunch_Bottom |
[Length] |
Width of bottom haunch |

Width_Haunch_Transition_Bottom |
[Length] |
Distance of variable thickness of bottom haunch |

Angle_Haunch_Transition_Bottom |
[Angle] |
Angle of bottom haunch |

Control ANG_HNC |
[yes/no] |
If activated, Angle_Haunch_Transition_Bottom parameter is taken into account. Otherwise, distance of variable thickness of bottom haunch is calculated using Width_Haunch_Transition_Bottom parameter. |

# Parapet#

This parapet section can be used as a superstructure object along the bridge axis.

## Overview#

NAME |
SOFiSTiK_Profile_Parapets_Left.rfa / SOFiSTiK_Profile_Parapets_Right.rfa |

TYPE |
Superstructure |

DESCRIPTION |
parapet |

PICTURE |

## List of Parameter#

PARAMETER |
DIMENSION |
DESCRIPTION |
---|---|---|

Neig_li / Neig_re |
[Length] |
Inclination to surface parapet |

b1_li / b1_re |
[Length] |
Width of parapet outside superstructure |

2_li / b2_re |
[Length] |
Width of parapet inside superstructure |

b_FB_lie / b_FB_re |
[Length] |
Offset parapet to main bridge axis |

h1_li / h1_re |
[Length] |
Height parapet below bridge deck surface |

D_PIER_bottom |
[Length] |
pier thickness bottom level |

h_Belag |
[Length] |
Height of pavement |